Jigs - Page 5 of 20

Adjustable Bandsaw Log Cutting and Jointing Sled Jig
December 10, 2013

I designed and built an adjustable bandsaw log slicing jig. The designed was inspired from similar contraptions online. The advantage of this jig is that it can easily adjust to…
Spindle sander concave curve sanding jig.
December 10, 2013

Feehanding a concave curve on a spindle sander tends to scallop. Made this to sand a curve parallel to a convex curve. Could be modified to run a template. Rig it…
Getting the Most From a Threadbox
December 1, 2013

A 1-inch threaded dowel can save some $ and add flexibility to the shop. Handy for outfeed table leveling feet, holding picture frames secure in a spline-cutting jig (the other…
Benchtop Template Multirouter phase2
November 9, 2013

These are some photos of my multirouter in the second phase. I build it and now it is time to test, adjust and setup this jig. I have to make…
Shop Built ambient dust collector
October 15, 2013

This is the ambient dust collector I made to gather dust missed by my main dust collectors. Dust is most effectively captured near the source and I work hard to…
Build a Twin Screw Vise
October 12, 2013

I made a Twin Screw Vise using my own threaded dowels. I am very pleased with how well it works. Can be used to hand cut dovetails and tenons. and…
Make Your Own Chisel for the Lathe
October 2, 2013

Expand your shopmade woodturning tool collection by making your own chisel using readily available high speed steel tool stock. Use this method to deal with rectangular tangs.
Templates Aid in Cutting Big Bowl Blanks
September 11, 2013

A simple hexagonal template guides your chainsaw cuts to produce balanced bowl blanks I used to eyeball chainsaw cuts to take the corners off a large half log, but the…
A planing stop for long and thin boards
August 23, 2013

Planing thin boards can be difficult. Clamp them between a pair of dogs and their likely to bow up. A stop attached to a plywood base is the perfect way…
Benchtop Template Multirouter prototype plan
August 17, 2013

These are photos of my prototype Multirouter. You can use it as a 1:1 template router, or as a fixed normal benchtop router table. The multirouter is not yet completly…

Page 5 of 20 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Jigs - Page 5 of 20

Get the latest from Fine Woodworking Magazine

#315-JAN/FEB 2025

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.