Router Jigs - Page 16 of 21

To enable me to rapidly insert and remove my router from my router table, I built the toggle-clamp fixture shown in the drawing above. I removed the rubber cushions from…

If you've used a router table, you know firsthand the annoyances that go with mounting, dismounting and adjusting the router under the table. So when I redesigned my router table,…

Here's a simple method for marking the drill holes for mounting a router to a jig or router-table insert. For each threaded mounting hole in the router base, purchase a…

Here's a router-table technique for producing clean, precise pocket holes for joining face-frame members. First, construct a wooden cradle fitted with a lever-operated toggle clamp. The cradle angles the workpiece…

This method provides a quick and accurate setup for jointing the edges of stock with a router. Make a two-piece jig that consists of an alignment fixture and a fence.…

This router table is quick to set up and hangs on the wall when not in use. A plunge router attaches to the table's underside using the rods provided for…

Cut tenons and sliding dovetails with an MDF jig that clamps to your workbench

Don't adjust that bit. Shopmade accessories do the work safely and efficiently.

Cut perfectly matched solid wood edging for a curved plywood panel

The simple lawnmower-wheel fixture sketched above has made featherboard hold-ins obsolete in my shop. I have two: one as shown and the other a mirror image of the first. I…