Router Jigs - Page 18 of 21

Router-Table Fence for Edging Discs
October 25, 2005

I developed the fence shown above to shape the edges of round rings, such as clock bezels, on the router table. The fence can shape both outside and inside edges…
Variable-Width Dado Fixture
October 25, 2005

This variable dado fixture will allow fine adjustment of the dado width from bit diameter to double the bit diameter. The fixture works on the principle that one edge of…
Flip-Up Router Fence
October 25, 2005

When routing grooves, some people draw a line on the work where the groove will be, then calculate where to clamp the fence. Others draw the line where the fence…
Routing Spline Slots in Mitered Frames
October 25, 2005

This simple little jig is extremely useful for routing blind spline slots in spline-mitered frames. Nail or glue together scraps of the frame lumber into the configuration shown in the…
Routing Wooden Spheres
October 25, 2005

Last Christmas, I wanted to give my wife a sphere covered with 1/2-in.-sq. mirrors. Styrofoam was my first thought, but a plastic ball would have cost $32, so I decided…
Raising Panels with the Router
October 25, 2005

I wanted to make some raised panels, but I didn't want to invest in a shaper and special cutters. My solution was to raise the panel with a 3/4-in., 2-flute…
Two Shopmade Router Subbases
October 25, 2005

In the woodworking shop at Edinboro State College, we've developed two router subbases that do away with much of the trauma associated with routing dadoes across wide boards and grooving…
Routing Dovetail Slots for Shaker Tablelegs
October 25, 2005

Although the Shaker pedestal table design has been around for 150 years, its clean lines have a contemporary feel. Inexpensive to build, the table requires only six wooden parts and…
T-Square Router Guide
October 25, 2005

Needs Copy
Routing European-Hinge Mortises
October 25, 2005

Several years ago, I remodeled my kitchen and painstakingly arrived at many of the details presented in Bill Pfeiffer's European-style cabinets article (Fine Woodworking #43). I have neither a drill…

Page 18 of 21 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Router Jigs - Page 18 of 21

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.