Steel - Page 3 of 12

Saw an article asking if CNC had any place in fine furniture, thought I would share an old project. Constructed of Baltic birch plywood cut into 3" rips, glued back…

Custom-forged hinges are the final touch on a middle earth-inspired cabinet.

Distressed/handscraped floors are becoming extremely popular these days. As a hardwood floor heritage restoration specialist, I have to admit that i roll my eyes a little bit when i see an...

Woodworker: In this white oak and handforged mild steel humidor, there are 48 raised panels in the sides, cut from oak and inserted into their half-lap framework from behind, secured…

Woodworker: William Robertson Built at 1/12th scale, this miniature toolbox and its contents, as seen on the back cover of Fine Woodworking #202, are an adaptation of the Hewlett chest, a...

Woodworker: Joseph LombardoLombardo used a flea-market find (a lathe with a good motor) as the guts for this lathe. Investing about $200 and 75 hours of elbow grease, he cleaned…

Woodworker: Andrew LunnLunn's goal as a toolmaker is exceptional function, but personality and visual appeal matter, too. This 26-in. ripsaw, with 5½ tpi, carries Lunn's original etching design from...

Woodworker: Nick BoyntonThis shopmade bandsaw has seen Boynton through hundreds of woodworking projects. The plywood-and-maple framework and table are torsion-box construction. Boynton says he took...

Nook-and-Cranny Plane

Woodworker: Keith TurnerAfter Turner used his first infill planes while taking a course in England with David Charlesworth, there was no turning back. Upon returning home, he studied their...