Tablesaw Accessories - Page 10 of 17

Shopmade Table Saw Tapering Jig
October 25, 2005

Adjustability, safety, and ease of use are key elements of this shopmade sled
Making a Safer Taper Jig
October 25, 2005

You can make a shop-built tablesaw taper jig safer and easier to use by adding a 1/8-in.-thick plywood or Masonite shelf to the bottom, and a hold-down clamp and a…
Improved Miter Gauge Runner
October 25, 2005

Over the years, I've seen many plans for homemade jigs that utilize a hardwood runner that fits in the miter-gauge slot. But, because wood shrinks and expands depending on the…
Micro-Adjustable Auxiliary Fence
October 25, 2005

In the past when I wanted to adjust the width of a cut just a hair, I usually just bumped the tablesaw fence with my hand with unpredictable results. To…
Hanging Rip Fence
October 25, 2005

Removing and then reinstalling the rip fence from my saw each time I crosscut a long board was time-consuming and awkward. My solution was to cut the rear rip-fence guide…
One-Minute Taper Jig
October 25, 2005

I use a jig to taper a guitar's fingerboards, but the jig could be adapted to table legs or any short tapering job. The limiting factor is the length of…
Mitering Frames on the Tablesaw
October 25, 2005

Much of the furniture I make is based on mitered frames, which require corners that have to meet perfectly. To make these frames, I use a sliding table jig on…
Improved Taper Jig
October 25, 2005

The tapering jig I use for short runs is just as quick to make as Phil Dark's (Fine Woodworking #98, p. 20), but it also handles longer workpieces and provides…
Jointing on the Table Saw
October 25, 2005

I needed to joint the edge of a 1-1/2-in.-thick tabletop laminated up from two pieces of 3/4-in. particleboard. The piece was too long and unwieldy for my jointer, and I…
Sliding Miter-Gauge Fence
October 25, 2005

I added a sliding fence to my tablesaw's miter gauge to enable it to perform like the gauges found on many European power tools. With a sliding fence, you can…

Page 10 of 17 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Tablesaw Accessories - Page 10 of 17

Get the latest from Fine Woodworking Magazine

#315-JAN/FEB 2025

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.