Tablesaw Accessories - Page 12 of 17

Making Dowels with the Table Saw
October 25, 2005

I prefer to make my own dowels for several good reasons. I can make any size dowel in any length from any wood. My system is simpler and certainly less…
Routed Miter Joint
October 25, 2005

I recently had to make two 24-in. long splined 45¡ miter joints to join a coffee-table top to its sides. Since the tabletop was too large for me to use…
Making Sectional Molding
October 25, 2005

Sectional molding for cabinet doors is easy to make on the tablesaw and lathe. Cut the straight sections on the tablesaw with a molding head. To make the semicircular section…
Miter-Gauge Setting Jig
October 25, 2005

Some tablesaw miter-gauge settings are the result of tedious trial-and-error, cut-and-fit procedures. Here's how to preserve that hard-won setting for future use. Cut two 1x2 strips about 1 ft. long.…
Table Saw Jointing Fixture
October 25, 2005

I wouldn't try this setup on a board shorter than 10 ft., but one of the handiest jigs in my shop is a tablesaw setup for straightening the edges of…
Trig Jig for Accurate Angles
October 25, 2005

With this simple jig and a little trigonometry, you can cut odd angles on the tablesaw more accurately than with the saw's miter gauge. First, construct a sliding table using…
Rip-Fence Extensions, Two Ways
October 25, 2005

My decision to extend the rip-fence tails on my Rockwell contractors' tablesaw came after a 4x8 sheet of plywood I was cutting "freehand" kicked back on me. I removed the…
Stationary Jig for Cutting Open Mortises
October 25, 2005

This jig is used to cut open bridle-joint mortises in frame members. It solves many of the problems inherent with sliding jigs, which tend to be complicated to make and…
Miter Gauge 3000
October 25, 2005

Incra’s 3000 series miter gauges feature a protractor-head design and adjust to various miter slots, with 364 angle stops.
GRR-Ripper Push Block
October 25, 2005

This is a well-designed push block for a variety of tablesaw ripping operations.

Page 12 of 17 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Tablesaw Accessories - Page 12 of 17

Get the latest from Fine Woodworking Magazine

#315-JAN/FEB 2025

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.