Tablesaw Jigs - Page 11 of 18

Improved Miter-Slot Runners
October 25, 2005

As anyone who has ever tried to make a sliding table for a tablesaw knows, aligning the runners to the sliding table correctly can be frustrating. The trick is to…
Quick Tapers on the Table Saw
October 25, 2005

Here's a quick and foolproof way to cut tapers. First draw the desired cut line on the workpiece in pencil. Set the saw fence to a width slightly greater than…
Table Saw Extension Fence
October 25, 2005

This wooden extension fence slips over the tablesaw's regular fence and more than doubles its length. It is an indispensable accessory when extended contact with the rip fence is necessary.…
A Micro-Adjustment for the Saw Fence
October 25, 2005

This micro-adjustment fixture enables you to fine-tune the settings on a Biesemeyer-style tablesaw rip fence. The fixture consists of two main parts: a block that attaches to the cross piece…
Double Miter-Gauge Jig for Cutting Angles
October 25, 2005

Frustrated by the inaccuracies and trial-and-error test cuts that seem to go with using a regular miter gauge on the tablesaw, I had set the gauge aside and relied on…
Jig for Making Beveled Notches
October 25, 2005

For a recent production run of toys, I had to cut several beveled notches on each toy. My first thought was to use a simple beveled block attached to my…
Cutting Stretchers for Tapered Legs
October 25, 2005

The ends of stretchers that join to tapered table legs must be crosscut at the same angle to join the legs properly. You can calculate the angle and set the…
Improved Table Saw Tapering Jig
October 25, 2005

You don't need a dedicated tapering jig to accurately set up often-repeated production runs. With this adjustable jig and a dedicated gauge block, you can repeat an exact setup time…
Miter Fixture for Cutting Moldings
October 25, 2005

This tablesaw miter fixture has an adjustable stop to cut picture frames and other moldings simply and quickly. The fixture itself is fairly standard with rails on the bottom that…
20-ft. Tablesaw Fence
October 25, 2005

Clamp a length of steel channel to your fence for extra reach when ripping on the tablesaw

Page 11 of 18 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Tablesaw Jigs - Page 11 of 18

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.