Tablesaw Jigs - Page 5 of 18

Video: Clever Sled for Curved Bevels on the Tablesaw
December 22, 2010

Learn Geoffrey Carson's method for cutting curved wide bevels using a modified panel-raising fence on the tablesaw. Watch the short video...
Slot a Zero-Clearance Insert Safely
December 1, 2010

Here’s how to safely cut a blade slot in a new zero-clearance tablesaw insert. With the blade all the way down, lock the rip fence in place over the right…
Knee Paddle Cuts Power Safely
October 18, 2010

One day after having a board bind up in my tablesaw and almost kick back, I looked into installing a paddle-style shut-off switch, sometimes called a panic switch. A commercial…
Quick Tip: Make a New Zero-Clearance Table Saw Insert
October 18, 2010

It is common practice to make a new zero-clearance tablesaw insert from a factory insert with a pattern-following bit in a router. Most articles recommend joining the old insert to…
Dedicated Sled Delivers Perfect Finger Joints
May 25, 2010

Most tablesaw jigs for cutting finger joints (also called box joints) mount to the miter gauge and must be tweaked every time they are reattached to the miter gauge. I…
Tablesaw Tenoning Jig
March 30, 2010

Make your own tenoning jig for the tablesaw with some scrap plywood and quick-release clamps.
Change Machine Height to Improve Comfort
February 11, 2010

Q: I’m over 6 ft. tall and have a bad back. Bending over to use my tablesaw and jointer just isn’t comfortable anymore. What can I do to make them…
Fence Transforms Table Saw Into a Real Router Table
February 2, 2010

Installing a router table in my tablesaw’s extension table saved a huge amount of shop space, but I needed to turn the rip fence into a router-table fence, and figure…
Table Saw Extension Supports Large Workpieces
February 2, 2010

When crosscutting wide materials on the tablesaw, you need extra support at the front and side of the saw. My support extension slides right into the end of the fence…
A Hinged Stop Block for the Table Saw
January 22, 2010

For repetitive crosscuts on the table saw, nothing beats this simple solution made from shop scraps

Page 5 of 18 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Tablesaw Jigs - Page 5 of 18

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.