Tablesaw Tenoning Jigs - Page 3 of 9

Tablesawn Keys for Mitered Boxes
October 25, 2005

Pieces of wood inserted diagonally into the outside corner of mitered joints add strength as well as beauty
Enhanced Tablesaw Miter Gauge
October 25, 2005

For five years I have looked unsuccessfully for a 10-in. table saw with a "rolling table" facility for crosscuts and miters. The one I'm familiar with is a big, old…
Stationary Jig for Cutting Open Mortises
October 25, 2005

This jig is used to cut open bridle-joint mortises in frame members. It solves many of the problems inherent with sliding jigs, which tend to be complicated to make and…
Rip-Fence Extensions, Two Ways
October 25, 2005

My decision to extend the rip-fence tails on my Rockwell contractors' tablesaw came after a 4x8 sheet of plywood I was cutting "freehand" kicked back on me. I removed the…
Trig Jig for Accurate Angles
October 25, 2005

With this simple jig and a little trigonometry, you can cut odd angles on the tablesaw more accurately than with the saw's miter gauge. First, construct a sliding table using…
Table Saw Jointing Fixture
October 25, 2005

I wouldn't try this setup on a board shorter than 10 ft., but one of the handiest jigs in my shop is a tablesaw setup for straightening the edges of…
Miter-Gauge Setting Jig
October 25, 2005

Some tablesaw miter-gauge settings are the result of tedious trial-and-error, cut-and-fit procedures. Here's how to preserve that hard-won setting for future use. Cut two 1x2 strips about 1 ft. long.…
Making Sectional Molding
October 25, 2005

Sectional molding for cabinet doors is easy to make on the tablesaw and lathe. Cut the straight sections on the tablesaw with a molding head. To make the semicircular section…
Routed Miter Joint
October 25, 2005

I recently had to make two 24-in. long splined 45¡ miter joints to join a coffee-table top to its sides. Since the tabletop was too large for me to use…
Making Dowels with the Table Saw
October 25, 2005

I prefer to make my own dowels for several good reasons. I can make any size dowel in any length from any wood. My system is simpler and certainly less…

Page 3 of 9 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Tablesaw Tenoning Jigs - Page 3 of 9

Get the latest from Fine Woodworking Magazine

#315-JAN/FEB 2025

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.