For this test, five wood species were treated with five different types of outdoor finish, and then racks of sample boards were left to sit outside for a year in Oregon, New Mexico, Louisiana, and Connecticut. Each region subjected the samples to a unique set of climate conditions. In the end, this test provided new insight on how outdoor finishes and different types of wood hold up to the elements.

Three coats of Smith & Co. Penetrating Epoxy Sealer plus five coats of Epifanes Marine Varnish were applied to the wood samples in this test. The finish held up well, as there were no signs of finish deterioration, and no signs of flaking or chipping. Samples showed only the slightest change in color. Used together in this test, the combination of Smith & Co. Penetrating Epoxy Sealer and Epifanes Marine Varnish received a rating of very good. These finishes are available from www.smithandcompany.org  and www.epifanes.com.

From Fine Woodworking #205

Fine Woodworking Recommended Products

Veritas Micro-Adjust Wheel Marking Gauge

The adjuster runs through the beam from a small knob at the back end right to the cutting wheel, which moves in and out as you turn the knob. This arrangement works well but makes adjustments a two-handed operation, requiring a little more effort.

Buy at Lee Valley

Sawstop Miter Gauge

It has a toothed angle-setting rack that is extremely solid, accurate, and easy to use, and it offers all of the features I love in a miter gauge, including the ability to add an auxiliary wood fence, and a flip-stop that will accommodate it.

Buy at Amazon

Stanley Powerlock 16-ft. tape measure

With its smooth lock, tough case, compact size, and excellent accuracy, this Stanley tape is perfect for workshop use.

Buy at Amazon