Dowel Planes Turn Scrapwood into Dowels and Pegs

The tool that gets borrowed most often by my co-workers at FWW is not one of my many prized handplanes but my old, beat-up dowel plate. This tool does a great job of turning scrapwood into dowels and pegs just by hammering square stock through one of the holes. My dowel plate has long been out of production, which is one reason why it’s so in demand. Now two companies have stepped up and filled the niche.

The Lie-Nielsen dowel plate, made from hardened A2 steel, is ready to make dowels in diameters ranging from 1⁄8 in. to 5⁄8 in. (There is also a metric version.) My original only went down to 1⁄4 in., and I really like the option of making smaller pins. Veritas has a different take. Veritas uses individually sized inserts, or “formers,” made from A2 steel, that snap into a steel plate. You can buy a set that includes the plate and four standard-size inserts (imperial or metric). Or you can buy the plate ($11.50) and just the inserts you need ($9.50 apiece).

Both products worked well and created accurately sized dowels. I found that pre-chamfering the corners of the stock and tapering the end in a pencil sharpener made the process easier and yielded better results. Each plate can be mounted to a bench or support block, but I typically just put the plate over a dog hole in my bench and pound away.

Which one to buy? It depends on the number of sizes you want. The Veritas system is a good value if you only need a few, but the Lie-Nielsen plate is a cheaper way to go if you want them all.

Fine Woodworking Recommended Products

Stanley Powerlock 16-ft. tape measure

With its smooth lock, tough case, compact size, and excellent accuracy, this Stanley tape is perfect for workshop use.

Buy at Amazon

Tite-Mark Marking Gauge

These gauges can be easily and precisely adjusted with one hand, which allows you to set the tool while holding a ruler or workpiece in the other. The quality is exceptional, and all have sharp cutters that offer great visibility.

Buy at Lie-Nielsen Toolworks

Lie-Nielsen No. 102 Low Angle Block Plane

With smooth, precise adjustments and wonderful balance, this compact block plane is a joy to use. It doesn’t have any bells and whistles, but there’s not a better block plane available for the money.

Buy at Direct