Shop Tips
Micro-Adjustable Router Fence
Joiner’s fence lets you creep up on a perfect fit
The adjustable fence is the key to precision and efficiency, according to Pat Warner. The fence is almost always in play and needs constant adjustment to handle the table’s changing responsibilities. This article shows how to make the a micro-adjustable router fence, which isn’t hard but must be assembled in a specific order. A detailed project plan shows all the parts. He demonstrates how to rout the dadoes, position the fence halves, and add the rule, the dial and the micro-adjustment assembly. He doesn’t leave out the finish, and adds a few words on using the fence properly.
From Fine Woodworking #144
Fine Woodworking Recommended Products
Festool Cleantec CT 26 E HEPA Dust Extractor
The clear winner here is Festool’s CT 48 Dust Extractor. It has amazing capacity relative to its size, and unmatched suction power. It packs in a number of subtle but very helpful design touches, like a clever foot brake and easy hose and cord storage.
Craftsman Random Orbit Sander
While this sander is among the least expensive models in the test, its performance ranks among the best. The stock removal was excellent, and dust collection was solid when used with a vacuum. It handles really smoothly, too, and has a tall body that fit my hand nicely whether I was holding it from above or around the waist.
Makita SP6000J1 Track Saw
With enough power to slice through thick hardwoods, the Makita makes smooth, chip-free cuts in all materials.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
Download FREE PDF
Comments
Where is the parts list?
Bump!! I’m looking for this too!
Hi,
I got this partial list years ago from FWW, and I'm finally getting around to building it. Note that the levers are not listed. I just ordered the dial indicator from Amazon at:
https://www.amazon.com/gp/product/B01JYCVHLK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
If either of you have figured out the specs for the levers, please post the info here. I'd appreciate it.
The file titled "One Person's...." was written by Pat Warner himself.
My router table surface is cast iron, so I won't be able to drill into it for the two large levers securing the base to the cast iron surface. I'm thinking of using MagSwitches, but haven't come to a final design option. Any suggestions?
Good luck, and stay in touch.
Jose E Martinez
[email protected]
I haven’t gotten around building it yet…but the levers as shown in the drawing are pretty standard (1/4-20 and 3/8-18) and can be ordered from McMaster Carr. The larger lever specifies a 3” stud, but that assumed you are screwing through the router table top. You could always thread-tap the cast iron…it’s soft enough to do by hand. Or just make the base wide enough to c-clamp it down at the tables edges.
Log in or create an account to post a comment.
Sign up Log in