After the repeated frustration of loosening and tightening the plastic locking knobs every time I needed to open or close the blast gates on my dust-collection system, I replaced the knobs with ball-nose spring plungers. The spring-loaded plunger puts enough constant pressure against the sliding gate that it won’t rattle closed from the suction of the dust collector. I found plungers that fit my blast-gate threads at McMaster-Carr (part No. 3408A521), but they are also available from most industrial suppliers. I also added a locknut so that I could adjust the plunger tension and lock in the setting. With the plungers installed, the gates easily slide in and out and stay right where I want them.

Jim Richey

Dean Hedstrom, St. Paul, MN

Fine Woodworking Recommended Products

Rockler Dust Right 650 CFM

While all five of the smaller units will collect chips efficiently when deployed properly, the 3/4-hp Rockler was just a bit more powerful in our suction test.

Buy at Amazon

Hedgehog featherboards

The Hedgehog's unique spiral shape and single knob make it easy to set up and fast to adjust.

Buy at Amazon

Stanley Powerlock 16-ft. tape measure

With its smooth lock, tough case, compact size, and excellent accuracy, this Stanley tape is perfect for workshop use.

Buy at Amazon