Tool technology keeps pressing forward, but for many woodworkers there’s no greater satisfaction than quietly chopping out a perfectly fitting dovetail by hand or shaping a piece of trim with a homemade scratch stock. Through the use of hand tools, and the jigs and fixtures that go with them, you can achieve equal results and a greater satisfaction than woodworking with power tools.

The Basics:
• Jigs for hand planes: From shooting boards to bench hooks
• Jigs for marking and cutting: Speed up the layout process
• Jigs for sharpening hand tools: Keep your tools consistently sharp

Jigs for hand planes
In essence, a hand plane is something like a jig in its own right; it has an adjustable fence that supports a blade, and depending on the design, its fence and blade can accomplish all kinds of tasks, such as flattening a surface and cutting a groove.

The more complex the plane, the more uses it will have. Just the same, jigs can add to the utility of a hand plane. There are a variety of jigs that can be used to increase the versatility of even the simplest hand plane. A shooting board can help you trim perfect miters with a bench plane. A bench hook can be used to plane thin stock or trim end grain. And a jig that guides a plane evenly along the edge of a workpiece can cut perfect chamfers or edge profiles.

Jigs for marking and cutting
Hand-cut dovetails have always been the hallmark of quality in furniture. However, even if you don’t have the steady hand to guide a backsaw to perfect dovetails, jigs for layout, marking, and cutting can aid the process. Jigs can be built to lay out consistently spaced dovetails, guide a handsaw to cut at the correct angle, and support a chisel at the correct angle when cleaning up dovetails.

Other hand-cut joinery techniques can be improved with the help of jigs and fixtures, including jigs to cut clean cheeks and shoulders on a mortise-and-tenon joint.

Jigs for sharpening hand tools
In addition to supporting hand tools during an operation, jigs are essential when sharpening hand tools. A sharpening jig can be used to turn a dull backsaw into a surgical dovetailing tool. Shop-made sharpening jigs are also available for tuning cabinet scrapers and chisels.

Fine Woodworking Recommended Products

Incra Miter 1000HD

One of many extremely accurate Incra miter gauges, this model offers 180-degree adjustment to 1/10 of a degree, and a long, straight fence with a telescoping stop system.

Buy at Amazon

Hedgehog featherboards

The Hedgehog's unique spiral shape and single knob make it easy to set up and fast to adjust.

Buy at Amazon

Double Sided Tape

A thin woven core makes XFasten tape strong yet not too thick (0.008 in.), and helps it hold powerfully without being difficult to peel off.

Buy at Amazon